Following up on BitX 17a – IF Filter, @n8dmt suggested that I could use a nanoVNA for this as well. After some fiddling with settings, I got it to work! The results are slightly different than what I measured before.
BitX 17a – IF Filter #2
Ham Radio Adventures
@blog Thinking that the indicated 20 dB of insertion loss is likely filter termination coupling loss against the 1 Mohm scope input compared to the NanoVNA’s 50 ohm receiver input. The shape appears similar between these two methods. Either way, lots of fun and learning here and ahead! Thanks for your blog posts! (Are they on blogs.radio? Contact K8VSY to be added.) FWIW, I have a few blog posts on RF, electronics, radio, & test equipment topics over at https://qsl.net/n8dmt/
Remote Reply
Original Comment URL
Your Profile
Why do I need to enter my profile?
This site is part of the ⁂ open social web, a network of interconnected social platforms (like Mastodon, Pixelfed, Friendica, and others). Unlike centralized social media, your account lives on a platform of your choice, and you can interact with people across different platforms.
By entering your profile, we can send you to your account where you can complete this action.